ONTILITY and S-5!
S-5! clamps attach to the panel seam by the tightening of two "bullet-nosed" stainless steel setscrews against the seam material. (This is usually done with an industrial grade screwgun.) The setscrews compress the seam material against the opposite wall of the clamp. They will "dimple" the seam material, but will not penetrate it. Threaded holes in the clamp (and stainless hardware provided) enable the easy attachment of various ancillary items to the clamps.
S-5-U Clamp
The S-5-U clamp is by far our most popular and most versatile clamp. It will fit about 85% of the standing seam profiles manufactured in North America — including most structural and architectural profiles. It can be used on vertically oriented seams, and by rotating the clamp 90 degrees, it can also be used on most horizontal 2” seam profiles. It’s simple design, generous dimensioning and multiple hole orientations are what make it so versatile for use with S-5!® snow retention products and other heavy-duty applications.
The S-5-U clamp is by far our most popular and most versatile clamp. It will fit about 85% of the standing seam profiles manufactured in North America — including most structural and architectural profiles. It can be used on vertically oriented seams, and by rotating the clamp 90 degrees, it can also be used on most horizontal 2” seam profiles. It’s simple design, generous dimensioning and multiple hole orientations are what make it so versatile for use with S-5!® snow retention products and other heavy-duty applications.
S-5-S Clamp
The S-5-S clamp is an extraordinarily versatile clamp. It was created especially for popular snap-together profiles-including residential profiles by Taylor Metals and Easy Lock Standing Seam. For horizontal seams under .540 inches, like the Firestone UC4, the S-5-S or S-5-S Mini can be used to avoid having to crimp the seam.
Its simple design and ample size make it so strong and versatile it can be used with S-5!® snow retention products and other heavy-duty applications.
The S-5-S clamp has been tested for load-to-failure results on most major brands and profiles of standing seam roofing. The independent lab test data found at www.S-5.com can be used for load-critical designs and applications. S-5!® holding strength is unmatched in the industry.
The S-5-S clamp is an extraordinarily versatile clamp. It was created especially for popular snap-together profiles-including residential profiles by Taylor Metals and Easy Lock Standing Seam. For horizontal seams under .540 inches, like the Firestone UC4, the S-5-S or S-5-S Mini can be used to avoid having to crimp the seam.
Its simple design and ample size make it so strong and versatile it can be used with S-5!® snow retention products and other heavy-duty applications.
The S-5-S clamp has been tested for load-to-failure results on most major brands and profiles of standing seam roofing. The independent lab test data found at www.S-5.com can be used for load-critical designs and applications. S-5!® holding strength is unmatched in the industry.
S-5-E Clamp
The S-5-E clamp is designed specially for double-folded standing seam roof profiles having the appropriate dimensioning. This clamp is also the one recommended for Butler’s MR24™. Although a bit smaller and less expensive than the S-5-U, for these profiles, the S-5-E is just as strong.
The S-5-E clamp is designed specially for double-folded standing seam roof profiles having the appropriate dimensioning. This clamp is also the one recommended for Butler’s MR24™. Although a bit smaller and less expensive than the S-5-U, for these profiles, the S-5-E is just as strong.
S-5-T Clamp
The S-5-T clamp is specially developed to fit profiles having a “T” shaped seam configuration. It will also work on architectural “single-fold,” or “angle-seam” profiles having a horizontal projection of 5/8” or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam.
The S-5-T clamp is specially developed to fit profiles having a “T” shaped seam configuration. It will also work on architectural “single-fold,” or “angle-seam” profiles having a horizontal projection of 5/8” or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam.
S-5-PV-Kit Attachment Solution
S-5! introduces the new and improved version of its popular S-5-PV Kit. The kit is designed specifically to secure framed photovoltaic modules to standing seam metal roof systems without penetrating the roof surface. S-5! has created a solution for the PV industry that:
S-5! introduces the new and improved version of its popular S-5-PV Kit. The kit is designed specifically to secure framed photovoltaic modules to standing seam metal roof systems without penetrating the roof surface. S-5! has created a solution for the PV industry that:
- Fits the majority of solar panels on the market!
- Fits the majority of metal roofs on the market - including exposed fastened and corrugated!
- Installs quickly and easily!
- Costs as little as $0.06 a watt!
- Universally fits both field (2 panels) and end conditions!
Download Data Sheet:
S-5-U Clamp (pdf, 1.9 MB)
S-5-S Clamp (pdf, 1.4 MB)
S-5-E Clamp (pdf, 3.5 MB)
S-5-T Clamp (pdf, 3.8 MB)
S-5-PV Kit (pdf, 1.9 MB)
