ONTILITY and UNIRAC
Standard Rail
Heavy Duty Rail
SolarMount Standard Rails
SolarMount Standard rails give you ultimate flexibility, including bottom mounting and tilt-up options. The SolarMount system is PE certified. Where foot spacing must exceed 48 inches, standard rails provide the extra strength. Install an array flush to a roof or other mounting surface in high profile (rails parallel to rafters) or low. Accessories handle special circumstances, such as Spanish tile or an uneven roof.
SolarMount Heavy Duty Rails
SolarMount Rail HD (heavy duty) rail adds strength to PV PoleTops, U-LAs and custom applications requiring long spans. SolarMount Standard rail gives you ultimate flexibility with bottom mounting and tilt-up options.
SolarMount Standard rails give you ultimate flexibility, including bottom mounting and tilt-up options. The SolarMount system is PE certified. Where foot spacing must exceed 48 inches, standard rails provide the extra strength. Install an array flush to a roof or other mounting surface in high profile (rails parallel to rafters) or low. Accessories handle special circumstances, such as Spanish tile or an uneven roof.
SolarMount Heavy Duty Rails
SolarMount Rail HD (heavy duty) rail adds strength to PV PoleTops, U-LAs and custom applications requiring long spans. SolarMount Standard rail gives you ultimate flexibility with bottom mounting and tilt-up options.
Splice Bar, Grounding Clip & Lugs
SolarMount Accessories and Attachments
SolarMount Accessories and Attachments include splice bars, grounding clips & lugs, standoffs, L-feet and flashing.
Flashing
L-Feet
Standoffs
SolarMount Accessories and Attachments include splice bars, grounding clips & lugs, standoffs, L-feet and flashing.
Flashing
L-Feet
Standoffs
SolarMount Tilts
SolarMount Tilt Legs
Minimize the vertical height of your array—to hide an array behind a parapet, for example. You can also optimize tilt angle on a pitched roof to maximize system performance. Tilt angle depends on leg length and the make and model of your PV modules. Use standard rail with all tilt legs.
Minimize the vertical height of your array—to hide an array behind a parapet, for example. You can also optimize tilt angle on a pitched roof to maximize system performance. Tilt angle depends on leg length and the make and model of your PV modules. Use standard rail with all tilt legs.
Mid Clamp and End Clamp
Sharp Lipped Mid & End Clamps and Bottom Mounting Clips
SolarMount Top & Bottom Clamps
Use Pro-Pak component prices when regularly using SolarMount on multiple installations. See pages 6-8 for the clamp size for your module type. End clamps: Order 4 for each row of modules you plan to mount. Mid clamps: For each row, take one less than the number of modules in the row and multiply that figure by 2. For example, a row of 4 modules requires 6 mid clamps: (4 - 1) x 2 = 6. You should verify that the module thickness matches the size given for each top clamp. Manufacturers may change dimensions without notice.
Use Pro-Pak component prices when regularly using SolarMount on multiple installations. See pages 6-8 for the clamp size for your module type. End clamps: Order 4 for each row of modules you plan to mount. Mid clamps: For each row, take one less than the number of modules in the row and multiply that figure by 2. For example, a row of 4 modules requires 6 mid clamps: (4 - 1) x 2 = 6. You should verify that the module thickness matches the size given for each top clamp. Manufacturers may change dimensions without notice.
1.0 Beam (144”)
Clamps, Splice & One Flange Connection
SolarMount-I
Engineered for flush mounting applications, SolarMount-I offers the one of the lowest total installed cost and best value in the industry. Building on the peace of mind you’ve come to expect from Unirac, the SolarMount I-Series features an optimized I-beam design, demonstrating excellent strength to weight ratio while providing features that speed the installation process. With no drilling required and “click and secure” connections eliminating the need for nuts and bolts, the SolarMount-I gets installers off the roof in nearly half the time when compared to competitive products.
Engineered for flush mounting applications, SolarMount-I offers the one of the lowest total installed cost and best value in the industry. Building on the peace of mind you’ve come to expect from Unirac, the SolarMount I-Series features an optimized I-beam design, demonstrating excellent strength to weight ratio while providing features that speed the installation process. With no drilling required and “click and secure” connections eliminating the need for nuts and bolts, the SolarMount-I gets installers off the roof in nearly half the time when compared to competitive products.
SunFrame Rail
Sunframe
SunFrame shared rail system makes clean energy look good. Unirac engineered the SunFrame to sit in low, gap-free rows, offering superior aesthetics. SunFrame is also the choice of solar experts as an optimal solution for custom carport structures. Modules are supported between SunFrame rails, not on top of them. The array is lower to the roof, enhancing its integrated appearance. A threaded slot atop the rail makes for quick and secure module mounting.
SunFrame shared rail system makes clean energy look good. Unirac engineered the SunFrame to sit in low, gap-free rows, offering superior aesthetics. SunFrame is also the choice of solar experts as an optimal solution for custom carport structures. Modules are supported between SunFrame rails, not on top of them. The array is lower to the roof, enhancing its integrated appearance. A threaded slot atop the rail makes for quick and secure module mounting.
RapidRac
RapidRac G10
Unirac’s new universal flat roof solution accommodates a wide range of modules, providing customers with flexibility & options. Minimal parts, faster installation, reduced labor expenses and versatility; all customer-driven demands that helped engineer this unique flat roof solution.
Unirac’s new universal flat roof solution accommodates a wide range of modules, providing customers with flexibility & options. Minimal parts, faster installation, reduced labor expenses and versatility; all customer-driven demands that helped engineer this unique flat roof solution.
Front, Rear Leg Caps & Slider
U-LA: Rail Mounting and Pipe Structure Components
Unirac Large Arrays start at 3 kilowatts, but their size is limited only by the size of your ground site or the structural strength of your flat roof. We design U-LAs for a wider range of site and climactic challenges than any other PV structure on the market.
Unirac Large Arrays start at 3 kilowatts, but their size is limited only by the size of your ground site or the structural strength of your flat roof. We design U-LAs for a wider range of site and climactic challenges than any other PV structure on the market.
Download Data Sheet:
Unirac SolarMount (pdf, 620 KB)
Unirac SolarMount-I (pdf, 4.6 MB)
Unirac SunFrame (pdf, 5.6 MB)
Unirac RapidRac (pdf, 1.2 MB)
Unirac U LA (pdf, 4.5 MB)
